Edge · Edge Gateways
BEC6200 Smart IoT Gateway
Xingkong DIN-rail gateway with 4× RS485 and CAN, Ethernet and 4G — for DDC boxes, distribution boards and building cabinets.
Role in the loop
In-cabinet pairing: aggregates serial devices in DDC boxes, distribution boards and building controllers for cloud or local management.
Specification
Capability scope
The following describes capability. Ranges, accuracy, port counts, power and operating temperature are confirmed against the current selection sheet — request the one for your scenario.
- 01
- Ethernet: RJ45, 10/100M Base-T
- 02
- RS485: 4 ports (xA+/xB-), 1200–115200 baud, default 9600 8N1
- 03
- CAN: CNH / CNL
- 04
- Debug port: DBA / DBB, RS485 115200 bit/s
- 05
- Power: P+ / P-, DC 9–30 V, rated under 5 W
- 06
- Environment: -20–60 °C, RH 5%–95% non-condensing
- 07
- Port ESD protection: ±15 kV
- 08
- Default IP: 192.168.0.109, Web port 80
- 09
- 4G / GNSS antenna: route outside the cabinet to a strong-signal spot
- 10
- Except the Ethernet port, terminals are not IP — do not connect a switch or router
Where it is used
Common applications
FAQ
About BEC6200
How do I open the BEC6200 Web page?
Connect the PC to the gateway by cable or the same switch, and set the PC to 192.168.0.x (not .109). Browse to the default IP 192.168.0.109 (Web port 80). If the IP was changed, hold RST on the panel for more than 15 seconds to restore factory settings, or search with TwIotDebug.