Edge · Edge Gateways

BEC6300 Smart IoT Gateway

Xingkong series. For smart poles, water sites and surveillance cabinets — switching, fibre ring and powered outputs in one box.

  • Xingkong series
  • BEC6300

Role in the loop

In-cabinet aggregation: brings cameras, displays and meters together, runs local interlocks, then uplinks over a fibre ring or Ethernet to the platform.

Specification

Capability scope

The following describes capability. Ranges, accuracy, port counts, power and operating temperature are confirmed against the current selection sheet — request the one for your scenario.

01
Ethernet: up to 8× RJ45, 10/100/1000M Base-T; PoE when ordered
02
Fibre: 2× 1 Gbps SFP, dual-fibre ring; 1000Base-LX / SX / BiDi modules
03
Ring and L2: link monitoring and ring alarms; STP / RSTP / ERPS (G.8032)
04
Digital inputs: 2, dry contact or TTL, 0–5.5 V
05
220 V powered outputs: 2, at least 1000 W each, relay-controlled
06
24 V powered outputs: 2, at least 50 W / 2 A each, with over-current protection
07
12 V powered output: 1, at least 30 W / 3 A; DC total not more than 80 W
08
RS485: up to 2 ports, Modbus, 1200–115200 baud
09
Debug: 1× RS232 Console at 115200 bit/s
10
Management: SNMP, HTTP; default IP 192.168.0.218, Web port 80
11
Power: AC 220 V / 50 Hz, about 5 W self-consumption (excluding loads)
12
205 × 117 × 60 mm, IP65; -20–60 °C, RH 5%–95% non-condensing
13
Port ESD ±15 kV; optional TF card up to 128 GB

FAQ

About BEC6300

How does BEC6300 differ from BEC6200?

BEC6200 is a DIN-rail serial gateway (4× RS485 + CAN) for meters inside a DDC box. BEC6300 is a cabinet-level access box: up to 8× gigabit switching, a dual SFP fibre ring, and 220 V / 24 V / 12 V powered outputs — for poles, water sites and surveillance cabinets.

How do I open the BEC6300 Web page?

Connect the PC to the gateway by cable or the same switch, and set the PC to 192.168.0.x (not .218). Browse to the default IP 192.168.0.218 (Web port 80). Whether PoE is fitted must be stated when ordering.

Next step

Request selection advice and documentation

Send an equipment list, protocol details or a point table, and we will return configuration advice, per-unit capacity and a feasibility assessment.

Can this equipment be connected?

Three fields are enough. Leave a phone number; we reply within 4 working hours.

Add more detail